https://ogma.newcastle.edu.au/vital/access/ /manager/Index en-au 5 https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:18974 Sat 24 Mar 2018 07:58:55 AEDT ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:19113 Sat 24 Mar 2018 07:55:52 AEDT ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:20156 Sat 24 Mar 2018 07:51:36 AEDT ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:30286 80%. The MAIT of four different coal dust samples (Australian coal) with particle sizes below 212 µm and dust layer thicknesses of 5, 12 and 15 mm were measured using a dust layer auto ignition temperature apparatus in accordance with the ASTM E2021 standard. It was concluded that the MAIT of the coal dust layer significantly decreases with decreasing particle size. The MAIT for the coal samples with a smaller D50 size were observed to be lower in comparison with samples with a larger D50 size. The dust layer thickness was shown to significantly impact on the MAIT. The MAIT increased proportionally with the increasing thickness of the coal dust layer. The effect of the coal dust moisture content and humidity on the MAIT for compacted dust layers was noticeable, whereas, this effect was less important with loose dust layers. In addition, this work investigated and compared the MAIT for a typical coal dust sample based on the existing ASTM and International Electrotechnical Commission (IEC) standard procedures for ignition of coal dust layers.]]> Sat 24 Mar 2018 07:33:35 AEDT ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:26524 Sat 24 Mar 2018 07:23:29 AEDT ]]>